Modular Seal Kit for Pneumatic Cylinders

Modular Seal Kit for Pneumatic Cylinders Covers All Kinds of Applications

Re-Posted with Permission

Original post by Sealing & Shielding Team on Wednesday, February 8, 2017


Modular seal kit for pneumatic cylinders covers all kinds of applications, Parker Prädifa offers a large number of combined pneumatic seals and wipers for the open groove of the EU system. By installing the right type of seal, a wide range of applications can be covered with just one cylinder. Another advantage – thanks to the open groove, the seals are very easy to install and remove.

For various application conditions

The available materials range from NBR, HNBR to FKM and TPU through to PA-based materials –

  • If extreme resistances, dry-running properties or stick-slip-free operation are required, PTFE compounds or UHMW PE will be used.
  • Further materials can be provided at the customer’s request. The wide range of available solutions can cover temperatures from -200°C to 260°C at a maximum speed of 1m/s.
  • Modified wiper geometries are available to provide protection against ambient influences. Without additional expense to the customer, they prevent ingress of liquids or fluids, viscous media or slight deposits into the cylinder.
  • For anti-torsion piston rods with two flat sides, special seals are available.
  • In case of harsh conditions, the use of split versions is recommended. This means that the material can be optimally adapted to the function of the seal and the wiper lip.

For hygienically sensitive applications

For hygienically sensitive applications in the food processing industry or life sciences, wiper lips without undercuts or indentations are available. If, in addition, a bactericidal or fungicidal effect is required, the seals can be made from a special TPU material with a formulation that counteracts the formation of cultures on the sealing surfaces over a long period of time. This also effectively stops the decomposition of the seal material.

For clean piston rods

Where elastomers and plastics no longer achieve a sufficient wiping effect metallic wipers are used. Thermal caking, ice, resins, slag, textile or paper dust as well as metal spray are reliably wiped off to keep the piston rod clean. This system can be snapped into the normal groove without any additional effort as well.


For easy installation

The seals can be very easily installed and removed through the open groove. If the system seal has to be replaced this can – depending on the seal type – typically be done without disassembling the cylinder and while the piston rod remains installed.

One groove – unlimited potential

The housing, which is identical for all sealing elements of the EU system, allows easy refitting of the pneumatic cylinders for different requirements. The seals are installed into the open housings by means of a handling tool.


      • Article contributed by
      • Roland Schüßler
      • Senior Application Engineer

Prädifa Technology Division

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s